Track Order
Wishlist

No products in the wishlist.

Return To Shop
Shopping Bag

No products in the cart.

Return To Shop
Shopping cart (0)
Subtotal: £0.00

View cartCheckout

Menu Categories
Wishlist
  • Call us on   +44 20 7193 6090
Facebook Twitter Youtube Instagram
Return to previous page
Grid
List
Show
New

*** SOLARPORT DELIVERY PRICE TBC *** for an accurate cost please contact your account handler

£700.00
Delivery of Solarport Modular Ground Mount will always require a dedicated vehicle and forklift. Please contact your account manager with your preferred delivery address and they will be able to provide an accurate delivery cost for you.

***COMPLETE KIT WITH FIXINGS*** Renusol Console+ 5200 75 K

£85.40
The Renusol ConSole buckets area ballasted solution for installing PV modules on flat roofs or the ground. The ConSole+ provides an angle of 15 degrees and can be fitted to flat roofs with a pitch of up to 5 degrees. Most commercially available framed standard PV modules fit on the ConSole. The ConSole is weighed down with ballast. Any material can be used: gravel, paving slabs, bricks, rocks etc. The amount of ballast depends on the height and location of the building. Before installing please read the Renusol Notes and use the Renusol PV Configurator to design your array and specify the ballast. Mounting components are included for framed PV-modules. The modules attach to the mounts using the mounting holes on the back of the module. Please check the measurements below against your panel specification: Max module length: 1550-2150 mm Holes gap - width: 895-1014 mm Holes gap - length: 690-1180 mm Note: The hole gap should be given on the panel datasheet in a form similar to the picture below. Pack includes: 1 x ConSole+ 2 x ConSole U-Profile 1035 mm 4 x Hexag screw DIN933-M6x20 A2-70 4 x Washer DIN9021-6,4-A2 4 x Self-locking hexag nut DIN985-M6-A2 4 x ConSole Clip 4 x Hexag screw DIN7504-ST5,5x25-A2-SW8 Max 80x to a pallet. 8Kg each.

BB125evo Reinforced BirdBlocker for Solar Panels 30m

£147.77
This is the 125mm long tines BB125evo version. Why do solar panels need shielding from birds? Mainly because the yield of the panels is reduced when the ventilation underneath is obstructed by branches and nesting material. The warmer the panels get the lower the efficiency. It also protects the birds, stopping them getting caught in the wiring amongst other things.

Dektite® Lead Multicable Solar Flashing (Tile or Slate Roof) DNLS10MB

£47.60
The Deks range of Solar Flashings are purpose made durable solutions as required by MCS and the professional choice for flashing cables on tile, slate or metal roofs.
This product has the acrylic coated lead base which is ideal for plain tile or slate roofs. Easy to fit, no maintenance, 20 years warranty and over 50 years experience from Deks Solardek flashings.

Fastensol 200mm Hanger Bolt for Steel

£6.72
These heavy-duty 200mm hanger bolts are suitable for fixing mounting rail to metal or corrugated cement roofs with steel supports, and come supplied with EPDM seal and two nuts, as well as a substantial steel or aluminium L-bracket. The bracket locks between the upper two nuts and is height adjustable.
New

Fastensol 3300mm Silver Rail

£23.10
The mounting rails are the core of the system. For each row of panels, a pair of rails is mounted horizontally on the roof and supported by rook hooks at no more than 1.2m intervals. The distance between the rails should be around three-quarters of the panel height. The panels are then laid on the rails and clamped in place with the end and mid clamps. For long rows, simply join lengths of rail using the rail splice kits. Rails can be cut to length with a hacksaw or grinder.

Fastensol A-Slate

£15.40
These aluminium plates allow for the easy installation of solar panels onto slate roofs. The plates sit on top of the slate tiles and are fastened above the battens/rafter.

Fastensol Flat Roof Tray (Landscape Bundle)- extended option

£77.00
The Fastensol plastic tray can be extended using their mini 140mm rail. This allows panels of widths of up to 1140mm to be mounted in landscape configuration using these Fastensol trays. Kit Includes: 1x Fastensol Plastic Tray 4 x 140mm Mini Rail This kit does not include:
  • Fastensol aluminium end clamps (4 per tray)
When fixing the 4x 140mm mini rails, you will need to drill additional holes on the side of the plastic trays. Please note that a lower ballast weight than the minimum weight on the datasheet can be used if stated by the ballast calculator

Fastensol Pan Tile Roof Hook (Portrait) – TH01

£6.44
These substantial stainless steel brackets are used to secure the mounting rails to the roof beams. These are suitable for pan tile and concrete tiled roofs only. To fit, a few tiles are removed from the outside of the roof and the hook secured to a rafter pointing 'downhill' with the tek screws provided. Plywood padding can be used to ensure the correct spacing from the tile surface. The tiles are simply replaced around the hook ensuring a weatherproof finish.

Fastensol Rail Bolt M10

£0.77

Use these for connecting GSE ground mounting to the Fastensol M10 rail.

Fastensol Standing Seam Clamp – for Bulb Seams

£3.08
These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, with a "bulb" or "concealed" seam type. You can then attach whatever you wish onto the hole on the top of the clamp. Currently we do not have a solution in stock to attach this to Fastensol rails.

Fastensol Triangle Bracket MPTB-GS (no screws/cross connects supplied)

Triangle bracket for flat roof or ground mounted solar systems for panels in portrait orientation with an angle of 30 degrees. This listing does not come with any screws, or cross connect clamps. Please select these separately, as these brackets can be utilised in a number of ways. Dimensions: rail is 40x40mm in L profile with 3 lengths of 1410, 1350 & 720mm Typically supplied either with:
  • Fastensol rail bolts to attach to  H-profile rail
  • With cross-rail brackets with hex nuts for attaching normal Fastensol rails.
  • Wood screws, metal screws, or hanger bolts, depending on your fixing requirements.

Fastensol Universal Clamp (for 30-46mm panels) – Silver

£1.26
Mounting solar panels just got even simpler with this universal panel clamp from Fastensol. The clamp is spring loaded meaning that it is compatible with any panel  from 30-46mm thickness. Due to it's clever design, it is also both a mid and end clamp in one - simply rotate the head 90 degrees either way to swap between either. 80x to a small carton, 320x to a large carton.

Genius Solarflash Slate Newbuild Flashing Kit

£4.34
Installing on slate roofs? Check out the Roof Toof, now in stock at Midsummer! Far quicker and less damaging then the traditional slate rip, it removes a lot of frustration for slate work! This is the Genius SolarFlash New Build (for new slate roofs) produced by Hallclip. The SolarFlash system is a simple and effective waterproof solution for roof brackets, and must be used with flat (rosemary, peg, biscuit) tile roof hooks such as the Fastensol roof bracket or Renusol flat tile hook. By installing with SolarFlash, it helps ensure that your installations are MSC012 compliant. SolarFlash is very easy to install and enables you to do a high-quality job and leave the roof tidy, reliable and weatherproof. You won't need any additional expert knowledge or training. The SolarFlash installation videos show you step-by-step how to easily and quickly install SolarFlash

GSE Black Lateral Flashing ***2022 NEW***

£19.60
2022 NEW VERSION - This version is compatible with ALL GSE trays - old and new.
Black side flashing piece for GSE roof integrated solar PV installations.
Please use the GSE calculator to see how many flashing pieces you require, or allow for sufficient to cover the sides your array(s). Ref: ALUN ART104644 LATERAL FLASHING - UNIVERSAL - 1290MM

GSE Black Top flashing

£35.70
The top flashings are not normally required in the UK as the tiles can overlap the top of the GSE frames. The top flashing is a useful option if positioning restrictions or the nature of your roof tiles mean that they do not overlap the top of the GSE frames far enough. Supplied in black to match the rest of the system.  

GSE End Clamps – Black

£1.61
Black end clamps for fixing solar panels onto GSE roof integrated solar PV frames. Important - please specify the size of clamp that you need using the drop down box above. For each clamp you will also need a screw and washer for clamp fixing, an EPDM seal and a structural plastic block. Also referred to in the manual as a simple / single clamp Please specify which size clamp you need from the drop down box. 50mm clamps are also available on request.

GSE Ground Mount Box Base – Bottom

£20.65
This is the box base for the GSE ground mount system. 2 of these are required for up to 4 panels, with an additional one needed for every 2 additional panels. Part number: ART102866

GSE Ground Mount L corner Fixed

£8.54
This 'L shaped' corner piece joins the front and side bases together and has a fixed length of 550mm, for the lower side of the mounting rail. 2 of these are needed per box base. This means that 4 fixed 'L' corner pieces are required for up to 4 panels, with an additional 2 pieces needed for every 2 additional panels.

GSE Ground Mount M6 Screw & Washer

£0.08
The M6 screw and washer is used to connect the box base and L shaped bracket. This should be coupled with the M6 nut.

GSE Portrait 1650 – 1100 (Half frame – 2 per panel)

£29.12
NEW PRODUCT RANGE - 2022 GSE trays are different to the usual - please take the time to read the manual and understand, and ensure you're using Easy-PV or the GSE configurator to ensure the correct trays are selected. NEW LATERAL FLASHING - there is also a new lateral flashing for the 2022 range of trays. The older flashing will not work on these trays, however the new flashing works with all trays in the GSE range - old and new. GSE's 2022 additions to the range now cover the latest tranche of larger solar PV modules, widening the net for compatibility. These new products have evolved from the 2012 and 2022 versions and are now delivered in two physical parts per module, rather than one. This listing is just for one half.

GSE Portrait 1710 – 1005 for split cells

£28.00
We have looked at quite a few roof integrated systems and are impressed with how simple and cost effective the GSE system is.

GSE Short 38mm Silver Screw – for use when no counter-battening on roof

£0.42
Short versions of the GSE screw (38mm instead of 60mm). This is to be used when fixing GSE frames/trays to the roof when counter-battening hasn't been used. This is increasingly common in the UK, and using this shorter screw prevents the risk of screwing through a single batten and into the roof felt.

Hookstop solar hook tile protector

£7.35
The product eliminates the problem on Rosemary tiled roofs of installers standing on the mounting rail and the downward flexing of the roof hook, cracking the roof tile. Manufactured with recycled rubber.
Width 165mm
Length 248mm
Height 10mm
Weight Approx 540g
Packed 6 per sheet. Price is per 1.
New

K2 Dome 6.10 Peak

£5.18
The K2 Dome 6.10 Peak clips into the dome base set to provide a 10 degree panel pitch. When used with the express dome no tools are necessary for installation of this part as it simply clips into place.

K2 Dome Black End Clamps

£2.24
K2 Dome Black End Clamps secure the solar panels to the K2 dome base set and dome peak, and are used at the ends of the row of panels. These end clamps are adjustable and are able to fit solar panels with a 30-50mm frame thickness.

K2 Dome FixPro L

£44.80
The K2 Dome FixPro L is a key part of the interface between the dome base set and the integrated roof anchor. This part is screwed in to dome base set using an M8 bolt and MK2 clip and attaches to the K2 Climber to facilitate an anchored conenction to the rest of the roof. The Dome FixPro is compatible with modules from 1617-2392mm long, making it compatible with the vast majority of panels on the market.

K2 Dome Speed Porter

£2.24
The K2 Dome Speed Porter is the simplest way to install ballast tiles on to the K2 Dome Base Set. A pair of speed porters should be used wherever ballast is installed on the K2 Dome Base Set. Each pair of trays can support up to 40kg and are simply placed over the K2 Dome Base Set.

K2 Mounting Rail SingleRail 36

£29.16
The K2 SingleRail 36, 3300mm rail is the core of the SingleRail system. Quick and low-cost with direct lateral connections to the rail including customised height adjustment. The SingleRail mounting system for photovoltaic assemblies is suitable for roofing with pan tiles and corrugated fibre cement or corrugated sheet metal. The roof fastening is done using roof hooks or hanger bolts. Lengths of rail can be joined together using rail splice kits to create longer rows. Rails can also be cut to length with a hacksaw or grinder.

K2 Roof Hook SingleHook 2 (with screws) for Flat Tile Roofs

£25.02
These stainless steel roof hooks are used to secure the mounting rails to the roof beams for flat tile roofing, really popular on the newer build properties with the thicker grey interlocking flat tiles, as its only 2mm thick then it saves the need to grind the upper tiles. The stainless steel bracket is fixed through one tile to the rafter beneath. The tile above is replaced above the fixings, so that the roof remains weather-tight. This mounting is attached in accordance with BS EN 490. With pre-assembled K2 Climber 36/50 and Allen bolt for K2 SingleRail mounting. Material: Stainless steel (1.4301)
Select your currency
USD United States (US) dollar
GBP Pound sterling
EUR Euro