The product eliminates the problem on Rosemary tiled roofs of installers standing on the mounting rail and the downward flexing of the roof hook, cracking the roof tile.
Manufactured with recycled rubber.
FOR THREE PHASE SUPPLY.
The Huawei smart power sensor provides an accurate, simple and efficient way of allowing the inverter to monitor home consumption for export limitation or battery system operation. This meter uses a CT to monitor power flow so there is no need to interrupt the supply, making installation easier. The CTs comes with the meter.
Features:
Measurement accuracy > class 1 with full temperature range
Measures current up to 80 A
Power export limitation control
LCD display, convenient for users to set and check
The Huawei 3kW hybrid with LUNA batteries are a complete PV and storage system kit in one place.
This kit contains:
Huawei 3kW 1ph Hybrid inverter
LUNA power module (BMS)
LUNA 5kWh battery modules - quantity selected in the drop down box
Huawei 1ph smart meter (CT included)
This kit does NOT contain:
Battery to inverter power cables (4-6mm2 DC cable)
Battery to inverter communication cable (Shielded CAT5 cable suitable - full specs in the manual)
Monitoring module - see options below
The inverters have built-in wifi but also have options for alternative connection methods which are LAN dongle or the 4G dongle, depending on the site requirements. These are not included as part of the bundle so, if required, the appropriate option should be added separately to the order.
Huawei's three phase hybrid inverters offer an unrivalled combination of safety, value and functionality, in a corner of the market where options are limited. The unit is fully compatible with the 450W power optimiser from Huawei, and can have 5-30kWh of storage attached. The result is the potential for a fully optimised, small scale three phase battery solution all under one brand and monitoring platform.
The units can also be installed in parallel with the larger 3ph Huawei string inverters, meaning that adding in battery storage to small and medium scale commercial installations is quite simple and cost effective.
Huawei's three phase 3kW Hybrid inverter offers an unrivalled combination of safety, value and functionality, in a corner of the market where options are limited.
The unit is fully compatible with the 450W power optimiser from Huawei, along with their 3kWh LUNA batteries. The result is the potential for a fully optimised, small scale three phase battery solution all under one brand and monitoring platform.
The units can also be installed in parallel with the larger 3ph Huawei string inverters, meaning that adding in battery storage to small and medium scale commercial installations is quite simple and cost effective.
Please be advised: this is NOT currently G100 approved. If you still wish to purchase this product, please send a written request to ops@midsummerenergy.co.uk with confirmation that you accept the kit without G99 or G100 certification.
This is the battery 5KWh module only and would need to add the power module to it.
A LUNA power system consists of a Power Module (BMS) and 1 to 3 Battery modules, make sure you have both for a complete system.
*The power output varies with the number of batteries, with >2 modules having a maximum output of 5kW.
Please Note:  As per Table 8-1 n the user manual, when paired with the SUN-2000 L1 range, the maximum charge rate from grid is 3kW.
Anti freeze valve manufactured by Inta with 28mm compression fittings. Their ‘Zero’ design is unique, engineered to protect heat pump systems that are operating with water and designed to discharge when the system water temperature drops to 3°C,...
The intaKlean HP magnetic filter for heat pump systems, features inta’s unique direct multi-layered non-ferrous filter, is the ideal solution to costly and unnecessary system breakdowns caused by both magnetic and non-ferrous particulate in central heating systems. As...
The K2 Dome 6.10 Peak clips into the dome base set to provide a 10 degree panel pitch. When used with the express dome no tools are necessary for installation of this part as it simply clips into place.
K2 Dome Black End Clamps secure the solar panels to the K2 dome base set and dome peak, and are used at the ends of the row of panels.
These end clamps are adjustable and are able to fit solar panels with a 30-50mm frame thickness.
The K2 Dome FixPro L is a key part of the interface between the dome base set and the integrated roof anchor. This part is screwed in to dome base set using an M8 bolt and MK2 clip and attaches to the K2 Climber to facilitate an anchored conenction to the rest of the roof.
The Dome FixPro is compatible with modules from 1617-2392mm long, making it compatible with the vast majority of panels on the market.
The K2 Dome Speed Porter is the simplest way to install ballast tiles on to the K2 Dome Base Set.
A pair of speed porters should be used wherever ballast is installed on the K2 Dome Base Set.
Each pair of trays can support up to 40kg and are simply placed over the K2 Dome Base Set.
The K2 SingleRail 36, 3300mm rail is the core of the SingleRail system. Quick and low-cost with direct lateral connections to the rail including customised height adjustment.
The SingleRail mounting system for photovoltaic assemblies is suitable for roofing with pan tiles and corrugated fibre cement or corrugated sheet metal. The roof fastening is done using roof hooks or hanger bolts.
Lengths of rail can be joined together using rail splice kits to create longer rows. Rails can also be cut to length with a hacksaw or grinder.
These stainless steel roof hooks are used to secure the mounting rails to the roof beams for flat tile roofing, really popular on the newer build properties with the thicker grey interlocking flat tiles, as its only 2mm thick then it saves the need to grind the upper tiles.
The stainless steel bracket is fixed through one tile to the rafter beneath. The tile above is replaced above the fixings, so that the roof remains weather-tight.
This mounting is attached in accordance with BS EN 490. With pre-assembled K2 Climber 36/50 and Allen bolt for K2 SingleRail mounting. Material: Stainless steel (1.4301)
This windbreaker must be installed with the K2 S-Dome to reduce the ballast requirements and prevent wind uplift on the panels. This windbreaker is compatible with panels from 1448-1779mm long.
Kit includes:
