This Battery Bundle contains the Growatt SPH BL-UP 3kW, combined with 6.5kWh GBLI6532 batteries for storage with all the required equipment included within this kit.
This kit can be chosen to have a battery storage of 6.5, 13, 19.5 or 26kWh depending on your requirements.
Please refer to these items for further detail on each component.
This Battery Bundle contains the Growatt SPH BL-UP 3kW, combined with 3.3kWh ML33RTA batteries for storage with all the required equipment included within this kit.
This kit can be chosen to have a battery storage of 3.3, 6.6, 9.9, 13.2, 16.5 or 19.8kWh depending on your requirements.
FOR THREE PHASE SUPPLY.
The Huawei smart power sensor provides an accurate, simple and efficient way of allowing the inverter to monitor home consumption for export limitation or battery system operation. This meter uses a CT to monitor power flow so there is no need to interrupt the supply, making installation easier. The CTs comes with the meter.
Features:
Measurement accuracy > class 1 with full temperature range
Measures current up to 80 A
Power export limitation control
LCD display, convenient for users to set and check
The Huawei 3kW hybrid with LUNA batteries are a complete PV and storage system kit in one place.
This kit contains:
Huawei 3kW 1ph Hybrid inverter
LUNA power module (BMS)
LUNA 5kWh battery modules - quantity selected in the drop down box
Huawei 1ph smart meter (CT included)
This kit does NOT contain:
Battery to inverter power cables (4-6mm2 DC cable)
Battery to inverter communication cable (Shielded CAT5 cable suitable - full specs in the manual)
Monitoring module - see options below
The inverters have built-in wifi but also have options for alternative connection methods which are LAN dongle or the 4G dongle, depending on the site requirements. These are not included as part of the bundle so, if required, the appropriate option should be added separately to the order.
Huawei's three phase hybrid inverters offer an unrivalled combination of safety, value and functionality, in a corner of the market where options are limited. The unit is fully compatible with the 450W power optimiser from Huawei, and can have 5-30kWh of storage attached. The result is the potential for a fully optimised, small scale three phase battery solution all under one brand and monitoring platform.
The units can also be installed in parallel with the larger 3ph Huawei string inverters, meaning that adding in battery storage to small and medium scale commercial installations is quite simple and cost effective.
Huawei's three phase 3kW Hybrid inverter offers an unrivalled combination of safety, value and functionality, in a corner of the market where options are limited.
The unit is fully compatible with the 450W power optimiser from Huawei, along with their 3kWh LUNA batteries. The result is the potential for a fully optimised, small scale three phase battery solution all under one brand and monitoring platform.
The units can also be installed in parallel with the larger 3ph Huawei string inverters, meaning that adding in battery storage to small and medium scale commercial installations is quite simple and cost effective.
Please be advised: this is NOT currently G100 approved. If you still wish to purchase this product, please send a written request to ops@midsummerenergy.co.uk with confirmation that you accept the kit without G99 or G100 certification.
This is the battery 5KWh module only and would need to add the power module to it.
A LUNA power system consists of a Power Module (BMS) and 1 to 3 Battery modules, make sure you have both for a complete system.
*The power output varies with the number of batteries, with >2 modules having a maximum output of 5kW.
Please Note: As per Table 8-1 n the user manual, when paired with the SUN-2000 L1 range, the maximum charge rate from grid is 3kW.
The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 3.68kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.
The libbi is the new hybrid inverter and battery bundle produced by myenergi. This is the 5kW hybrid inverter and allows for seamless integration between all myenergi devices. Up to 4 batteries can be added to the libbi in parallel, meaning up to 20kWh of energy storage is available. Furthermore, this product has the added option of emergency power supply (EPS) backup in the event of a blackout.
The Myenergi libbi stores excess electricity for when you need it most. It allows you to capture as much surplus solar electricity as possible, whilst integrating with existing myenergi devices.
libbi is modular by design, meaning each module can store up to 5kWh of electricity, so combining 4 of them together would provide up to 20kWh of storage.
Polar ESS is a new company in the renewable energy space - bringing the price of energy storage systems down to help everyone afford cheaper and/or cleaner energy for their homes.
This bundle includes 1 x Polar 3.6kW Hybrid Inverter, 1-5 x 5.2kWh Battery, 1 x Polar Breaker + 2 x 160A Fuses, 1-4 x Polar Parallel Foot Pack, 1 x WiFi dongle (with 1 year portal access), 1 x GEM120 Energy Meter, and 1 x Polar Inverter to Battery Cable and 1-4 x Polar Battery to Battery Parallel Cable.
Inverter features:
A solar inverter and a battery inverter in one tidy little unit
Two power capacity options, to meet your power needs
Seriously high cost-performance ratio (aka, bang for that buck)
Can be installed nice and neat in a standard server rack
Loads of inbuilt safety features
Supports voltage balancing function during charging (or passive balancing for the techies)
Supports multiple parallel operations, so you can scale as you like
Displays key info like charging/discharging voltage and current via a handy digital screen
Positive and negative power cables for connecting a Sofar Amass GTX5000 battery to a Sofar HYD or ME inverter.
One set required per inverter.
Product Code = 021.00000049-0
Positive and negative power cables for connecting a Sofar Amass GTX5000 battery to a Sofar HYD or ME inverter.
One set required per inverter.
Product Code = 021.00000049-0
The two parts of the Solar iBoost+ system talk to each other wirelessly. There is a Sender that measures how much is being exported which transmits information to the actual Solar iBoost+ itself and this responds by releasing the free energy available to heat up water in your customers tank.
Simple to install wireless energy sensor
The Solar iBoost+ unit receives information wirelessly from the sender unit and controls the power to the immersion heater.
Simply clamp the sensor around the household's outgoing supply cable at the electricity meter. Optional iBoost Buddy also now available.
Currently only compatible with SolarEdge single phase Home wave and Home Hub, from 2,200 - 10,000.
DC coupled - high effiency and no G99 application required if using a G98 compliant inverter
Super quick installation - just DC cables from inverter to battery (comms are wireless)
Extremely flexible installation - battery can be 50m from the inverter and outdoors
Full monitoring on the well-loved SolarEdge portal
Components:
You will likely need the following components, depending on the size of HD Wave you're connecting to, and whether or not there is an existing Energy Meter in place. Contact us for details:
Standard DC PV cable (for connecting battery to HD Wave)
Staubli MC4 branch connectors (if you're connecting to any HD Wave <4kW, as these only have one set of physical MC4 inputs. When installing a battery you need two - one for PV, one for battery, the branch connectors allow for this when only one set of physical inputs is present on the smaller HD Waves <4kW)
If installing multiple EnergyBanks on a single HD Wave, you will also need N-1 quantity of SolarEdge branch connectors, where N=number of EnergyBanks (3 maximum). As of 19.8.22 we don't stock these, but will get some soon
If installing more than one EnergyBank, you must use 10mm2 DC cable minimum, 6mm2 will not be sufficient
G100 note - this product is connected to the inverter, so uses the inverter's G100 certificate.
he Home Smart Energy Hot Water Heater is a Smart Energy product that diverts excess energy produced by a PV system to a load, normally a hot water heater. The device saves energy, helps optimise solar energy usage, and reduces utility bills by storing energy as hot water during the day when surplus energy is high, and providing free hot water later on in the day.
These devices communicate with the SolarEdge Home ecosystem via the wireless mesh SolarEdge Home Network. The SolarEdge Home Network communication replaces the previous ZigBee-based wireless communication for improved network stability, easier setup and control.
For the immersion to work the SolarEdge inverter will require the Modbus meter to track consumption.
SolarEdge Home Network-based load control devices cannot be mixed with ZigBee-based load control devices for the same inverter or site installation. For more information, click here.
To learn more about the SolarEdge Home Network, click here.
To verify if your inverter communicates via the SolarEdge Home Network, please click here.
The SolarEdge Home Battery offers a low voltage, DC-coupled storage solution, optimised to integrate with a “Three phase” SolarEdge system. The SolarEdge Home Battery storage helps meet household energy demands, resulting in less or cheaper electricity purchased from the grid.
A SolarEdge integrated storage solution means that PV generation, storage, EV charging and smart device control will all be managed and monitored on one platform - the MySolarEdge app - for both smoother installations and ease of use by the resident.
The SolarEdge Home Battery comes with a 10 year warranty, with a minimum of 70% capacity at the end of the warranty period after an unlimited number of discharges - for more warranty information please see the Warranty download on the right.
Features:
DC coupled battery featuring superior overall system efficiency, generating more energy to store and use for on-grid and backup* power application
Integrates seamlessly with the complete SolarEdge Home ecosystem, offering a single source for warranty, support and training, to streamlined logistics & operations
Includes enhanced safety features for battery protection
Scalable solution that enables to stack up multiple battery modules per inverter for increased capacity (up to 23 kWh)
Solar, storage, EV charging, and smart devices all monitored and managed by a single app for optimized production, consumption, and backup* power
Simple plug and play installation, with automatic SetApp-based configuration
New ENET comms plug in for SolarEdge HD-Wave inverters with Energy Bank installations. Use this for installations when adding an Energy Bank Battery to an existing HD-Wave inverter with screen.
This Kit includes both a comms board and an ENET plug in.
This Three Phase Battery Bundle contains the 5kW SolarEdge 3 phase HomeHub inverter combined with their range of 4.6kWh LV Home batteries for energy storage.
This Kit Includes:
SE5K HomeHub Inverter with Backup Compatibility
Up to 5 LV Home Battery Modules
Battery Top Cover
1 for up to 3 batteries
2 for 4-5 batteries
Inverter to battery cable
Battery to battery cables (if required)
1 for 2 batteries
2 for 3-4 batteries
3 for 5 batteries
Tower to tower cable (if required)
1 for 4-5 batteries.
Please note that this kit does not include the Backup Interface or Floor Stand.
(Optional one floor stand for 1, 2 or 3 battery modules, two floor stands for 4 or 5 battery modules).
You will need a suitable power optimiser for this inverter.
SolarEdge also have an online system design tool called SolarEdge Designer.
Battery Module Spec.
Rated AC Power output:
3,680VA
AC Output Voltage:
184-264.5Vac
Max Current:
16A
No. Phases:
1
Output AC Backup
Max Power Output:
5,400VA
Max current (per phase):
Number of phases:
27.5A
1
Input PV
Maximum DC Power(Mod stc):
7,360W
Max Input Voltage:
480V
Nominal DC Input:
380V
Max input Current:
10.5A
Peak Inverter efficiency:
99.2%
Battery Storage
Supported Battery:
SolarEdge Home Battery 400V
No. Batteries per Inverter:
1-3
Continuous Power:
Continuous Discharge Power:
5,000W per battery
Limited to inverter rated AC power.
Specifications
Protection Rating:
Weight:
IP65
12Kg
Dimensions (HxWxD):
459*370*154
Supported Comms:
RS485, Ethernet, Wi-Fi, SolarEdge Home Network
Key features
Record-breaking 99% weighted efficiency with
up to 200% DC oversizing.
Small, lightweight, and easy to install.
Advanced safety features with integrated arc
fault protection.
Enables module-level monitoring and full
visibility of battery status, PV production, and
self-consumption data.
A scalable solution that supports future
homeowner needs through easy connection to
a growing ecosystem of products.
The advantages of using a SolarEdge system were analysed by third party testing organisation Photon and who generated the following report and summary. Checking the status of a SolarEdge products warranty can be done here.
Max current (per phase):
Number of phases:
Auto Switchover time:
7.2 A
3
< 10s
Input PV
Maximum DC Power(Mod stc):
10,000W
Max Input Voltage:
900V
Nominal DC Input:
750V
Max input Current:
13.3A
Peak Inverter efficiency:
98%
Input/Output Battery
Max Charge/Discharge power:
5000W
Input Voltage Range:
40-62V
Max Continuous Current:
Communication:
125
CAN
Specifications
Protection Rating:
Weight:
IP65
37Kg
Dimensions (HxWxD):
907 x 317 x 192
Supported Comms:
Wifi & Cellular
Key features
Simple installation.
Enhanced safety with high voltage elimination during installation, monitoring and firefighting.
Quick inverter commissioning using SetApp.
Inverter manages both PV , battery storage and power outage operation* (*with additional hardware and firmware upgrade).
Module-level monitoring with full battery status visibility and PV.
DC coupled solution nullifying AC conversion losses to the battery
The advantages of using a SolarEdge system were analysed by third party testing organisation Photon and who generated the following report and summary. Checking the status of a SolarEdge products warranty can be done here.
The SolaX TP58 BMS Parallel Box is an innovative accessory designed to increase the capacity of a SolaX energy storage system.
The utilisation of the TP58 BMS Parallel box removes the need for a TP58 master battery to perform battery management and can accommodate double the number of batteries that could previously be installed. This means up to 6 x TP58 batteries can be installed with an X1 inverters and up to 8 batteries with X3 inverters.
The SolaX TP58 BMS Parallel Box is a reliable and efficient accessory that enhances the capacity, working hours, and battery life of your ESS. With its easy installation, modular design, and intelligent management features, it provides a comprehensive solution for your energy storage needs.
