Indoor unit, suitable for new builds and renovations, The AWE are intended for assembly in a house and for connection to Compress 7001i AW/Compress 7400i AW heat pumps installed outdoors. Quiet, neat and compact they fit well into any home.
GSE EPDM Wedge For Clamps - In Roof (25x21 Thick. 5mm) - Provides a watertight finish between the GSE middle and end clamps. EPDM sheets should be placed under the clamps.
The GSE Flexalu Strip is a roll of 330mm waterproofing strip, which can be applied with drip edge along the gutter during the installation of an In-Roof PV mounting system.
Easy to install: modular fixing system
Quick to install: 3-5kW systems take as little as 6 hours
Flexible: achieve any desired configuration type
Lightweight: systems are easy to transport
Climate Resistant: -30°C to 100°C
Waterproof: 100% watertight when tested in severe climatic conditions
Recyclable: polypropylene frames and steel/aluminium fixings are 100% recyclable
Warranty: Guaranteed for 10 years, SMABTP backed warranty
The GSE 1650 x 1135mm Half Portrait Frame facilitates the installation of solar PV modules as part of an integrated in-roof system. GSE introduced the half frame design in 2022 to keep-up with the ever-expanding PV module market. The nature of the design caters for larger, wider and more powerful modules which are becoming more commonplace with solar PV manufacturers.
The GSE In-Roof System enables module installation on every type of roof covering (curved tiles, interlocking, flat tiles, slates, metal, zinc, trapezoidal), as well as on new buildings. The system must be installed on the wooden or metallic substructure of the buildings and mounted on specific battens, adapted to climatic conditions. It can be mounted on slopes between 12° and 50°.
This system goes together quickly and easily. The plastic trays that interlock are fixed to battens, with the roof tiles fitting up to the flashing. The panels are then hooked onto the trays and clamped into place.
Key Features
Easy to install
Compatible with range of standard panels
Lightweight at 2-3kg /m2
100 percent recyclable materials
The GSE Pre-Compressed Seal is a 5.5m roll of pre-compressed sealing strip, which can provide a complete waterproof perimeter around the PV array. The sealing strip is suitable for use between the flashing and tiles around the area on the lateral and upper parts – helping to prevent the infiltration of water or solid particles.
The GSE Pre-Compressed Seal is a 5.5m roll of pre-compressed sealing strip, which can provide a complete waterproof perimeter around the PV array. The sealing strip is suitable for use between the flashing and tiles around the area on the lateral and upper parts – helping to prevent the infiltration of water or solid particles.
This is a 1.5m long top centre flashing in black. The top flashing has been designed as part of the GSE In-Roof System: enabling module installation on all roof covering types, including retrofit
This is a corner piece, which can be used to join top centre flashings in an integrated In-Roof PV System.
Mounting System: In-Roof Flashing
Position: Corner Piece Support
Position: Top Centre
Colour: Black
Dimensions (wxhxd)(mm): 1400x30x20
Weight: 0.15kg
Manufacturer_LONGi
The LONGi Solar 425W Hi-Mo6 HPBC Mono Solar Module has a 21.1% efficiency and comes with 12-year product warranty and 25 year linear power output warranty.
Smart Soldering
Uniform smart soldering increases the power and efficiency of the module, and improves the power load capacity.
Optimized Module Size
Large-format modules with M10 wafer size use dual-glass and frame packaging to ensure module strength.
Smart Module Packaging and Logistics
Smart module packaging solutions are used to achieve high reliability, low-cost transportation and logistics.
Optimized Electrical Parameters
The working current is about 13A, which is perfectly adapted to mainstream string inverters.
Gallium-doped Technology
Gallium-doped technology overcomes LID degradation and guarantees the long-term power generation of the module.
Bifacial Energy Yield
Additional power generation from the backside of bifacial modules increases the overall energy yield, which has been verified by customers and third-party testing organizations.
High module efficiency of 22%
Advanced module technology delivers superior module efficiency
Excellent outdoor power generation performance
Pure black for extreme elegance
Less than 1.5% power degradation in the first year
0.4% yearly power degradation from year 2-25
Meyer Burger 390W White Backsheet Solar PV Module - MB-10301303
Rated power 390 Wp
Efficiency: 21.2 percent
White backsheet film
Module with 120 half-cells monocrystalline n-Si HJT (heterojunction) cells
25 years product and performance warranty
The Meyer Burger 390W with white backsheet solar panel (module) features high breakage resistance thanks to patented SmartWire Connection Technologyâ„¢. Meyer Burger solar modules are manufactured in Germany and designed in Switzerland.
Renusol VS+ Mounting Rail 41 x 35 x 3600mm from the VS+ range. Renusol’s VS+ universal mounting system is suitable for nearly all types of pitched roofs in Europe.
VS+ is a modular design system and can be used with pitched roofs on commercial, industrial, agricultural (except hydrogen sulfide exposition) and residential buildings.
Up to 440W, 22.0% module efficiency with higher density interconnect technology
Multi-busbar technology for better light trapping, lower series resistance, improved current collection & enhanced reliability
Reduce installation cost with higher power bin & efficiency
Boost performance in warm weather with low temperature coefficient (-0.30%) & operating temperature
Dual-Glass Design, more secure & sustainable
Upgraded dual glass of Vertex S, less prone to micro-cracks & scratches on the back during installation
Double-glass + innovative non-destructive cutting for improved mechanical resistance & strength
Resistant to harsh environments such as salt, ammonia, sand, high temperature & high humidity areas & fire class rating A or C
Ultra-Low Degradation, longer warranty, higher output
First-year degradation 1% & annual degradation at 0.4%
25 Year product & 30 year power warranty
Universal Solution
Easy for integration, designed for compatibility with existing mainstream inverters & diverse mounting systems
Perfect size & low weight for handling & installations
Most valuable solution on low load capacity rooftops
Mechanical performance up to 5400 Pa positive load & 4000 Pa negative load
Trina 450 W photovoltaic module from the Vertex S+ range is made of monocrystalline cells with 210 silicon wafer in i-Topcon N-type technology.
Vertex S + has several innovative design features that allow it to achieve high output power. Perfect temperature coefficient and low irradiation efficiency provide even more power. Moreover, thanks to the high-density connections, the efficiency of the Vertex S + can reach up to 22.5%.
Multi-busbar technology used in Trina Vertex S + modules integrates advanced non-destructive cutting and high-density encapsulation technologies. It is also responsible for increased light absorption and fits perfectly into cells with a large surface area. The technology integration allows Vertex to achieve higher power and efficiency of generating energy per watt.
The N-type cells are made using phosphor, which allows them to achieve a lower rate of power degradation, which translates into higher efficiency for many years of use, resulting in more savings. It is thanks to this technology that the manufacturer provides a 30-year warranty on the energy produced by the Trina Vertex S + modules.
Vertex S + TSM-NEG9R.28 photovoltaic modules are made up of 144 monocrystalline cells placed in a 30 mm thick frame, made of anodized aluminium alloy, front and back covered with 1.6 mm thick heat strengthened high transparency glass. The modules have a 25-year warranty for the product and a 30-year warranty for performance.
The connection wires coming out of the IP68-rated boxes are terminated with an MC4 connector.
